java.lang.Object
- com.scriptel.proscript.Device

public final class Device
extends java.lang.Object

This class represents a physical ScripTouch device.

Field Summary

Fields
Modifier and Type	Field	Description
`static int`	`DEVICE_DISCARD_CHANGES`	Constant for discard changes made to regions and screens on the device.
`static int`	`DEVICE_FACTORY_RESET`	Constant for restore factory defaults to regions and screens on the device.
`static int`	`DEVICE_SAVE_CHANGES`	Constant for save changes made to regions and screens on the device.
`static int`	`POWER_STATE_NORMAL`	Constant for the normal power state.
`static int`	`POWER_STATE_POWERDOWN`	Constant for the power down power state.
`static int`	`POWER_STATE_STANDBY`	Constant for the standby power state.
`static int`	`RUNMODE_AUTOTOUCH`	Constant for the auto touch run mode (not supported by all devices).
`static int`	`RUNMODE_COMMAND`	Constant for the command run mode.
`static int`	`RUNMODE_PEN`	Constant for the pen run mode.
`static int`	`RUNMODE_PENCONTINUOUS`	Constant for the pen continuous run mode (reserved for later use).
`static int`	`RUNMODE_PENSINGLE`	Constant for the pen single run mode (reserved for later use).
`static int`	`RUNMODE_PENSTREAM`	Constant for the pen stream run mode (reserved for later use).
`static int`	`RUNMODE_TOUCH`	Constant for the touch run mode (not supported by all devices).
`static int`	`RUNMODE_TOUCHSINGLE`	Constant for the touch single run mode (reserved for later use).
`static int`	`RUNMODE_TOUCHSTREAM`	Constant for the touch stream run mode (reserved for later use).
`static int`	`SIMULATE_COORD_DEVICE_SPACE`	Constant for use with simulatePenInput() that tells the device that x and y are in coordinate space (0-499 for EasyScript 1.0, 0-2999 for EasyScript 3.0, or 0-65535 for ProScript).
`static int`	`SIMULATE_COORD_DISPLAY_SPACE`	Constant for use with simulatePenInput() that tells the device that x and y are in display pixels.
`static int`	`TEXTALIGN_CENTER`	Constant for aligning text anchors to the center of the text body.
`static int`	`TEXTALIGN_LEFT`	Constant for aligning text anchors to the left of the text body.
`static int`	`TEXTALIGN_RIGHT`	Constant for aligning text anchors to the right of the text body.

Method Summary

All Methods Instance Methods Concrete Methods Deprecated Methods
Modifier and Type	Method	Description
`void`	`asicReset(boolean hardwareReset)`	This method performs either a hard or soft reset of the ASIC.
`void`	`calibrate()`	This method puts the device into calibration mode.
`void`	`cancelCalibration()`	This method cancels calibration.
`void`	`clearLastError()`	This method clears the last error message from the device.
`void`	`clearScreen()`	This method clears the device's screen.
`void`	`close()`	This method attempts to close the device with the operating system.
`void`	`deleteDeviceRegion(int index)`	This method deletes the values of a region at the given index (153).
`void`	`deleteRegion(int region)`	Deprecated. This method is deprecated in firmware versions greater than 4.0.0 use deleteDeviceRegion() instead.
`void`	`deleteResource(int index)`	This method deletes a Resource from the device
`void`	`deleteScreen(int screenNumber)`	This method will delete the screen information at the given index.
`void`	`drawText(java.lang.String text, int x, int y, int align, boolean invert)`	This method draws text on the screen (if equipped).
`void`	`GENIIAbortTune()`	Abort the pen tuning process for GENII devices.
`void`	`GENIITune()`	Initiate the pen tuning process for GENII devices.
`int`	`getActiveScreen()`	This Method gets the index value of the current Screen.
`byte[]`	`getAsicRegister()`	This method attempts to get the current ASIC register values.
`CalibrationData`	`getCalibrationData()`	This method gets the calibration data.
`CalibrationState`	`getCalibrationState()`	This method attempts to get the current calibration state from the device.
`Capabilities`	`getCapabilities()`	Gets the capabilities of this device.
`Configuration`	`getConfiguration()`	This method attempts to get the configuration from a ScripTouch mouse device.
`int`	`getContactCountMaximum()`	This method attempts to get the maximum number of contacts a ScripTouch multi-touch device supports.
`CoordinateRange`	`getCoordinateRange()`	Gets the logical coordinate range for this device.
`Region[]`	`getDefaultRegions()`	Deprecated. This method is deprecated in firmware versions greater than 4.0.0 since default regions no longer exist.
`Region`	`getDeviceRegion()`	This method gets a region based off the index and report 152.
`Region[]`	`getDeviceRegions()`	This method returns regions based on report 152.
`DeviceStatus`	`getDeviceStatus()`	This method gets the current status or mode of the device
`java.awt.image.BufferedImage`	`getDisplayContents()`	This method will read the screen of a display info a buffered image.
`Display`	`getDisplayInfo()`	Gets the static display information from the device.
`DisplaySettings`	`getDisplaySettings()`	Gets the dynamic display settings from the device.
`java.lang.String`	`getDriverName()`	Gets the name of the driver attached to this device.
`byte[]`	`getErrorCorrectionTable()`	This method attempts to get the error correction table from the device.
`FrequencyAmplitude`	`getFrequencyAmplitude()`	This method attempts to get the frequency and amplitude settings from the device.
`GeneralParameters`	`getGeneralParameters()`	This method attempts to get the general operating parameters from the device.
`int`	`getGENIIConfiguration()`	Gets the hardware configuration from a GENII device
`byte[]`	`getGENIIGuid()`	This method retrieves the globally unique identifier for this device from the device.
`TuningStatus`	`getGENIITuningStatus()`	This method attempts to get the frequency and amplitude settings from the device.
`java.lang.String`	`getManufacturer()`	Gets the manufacturer of the device.
`java.lang.String`	`getModel()`	Gets the model of the device.
`OperatingModes`	`getOperatingModes()`	This method attempts to get the supported operating modes from the device.
`OutputConfiguration`	`getOutputConfiguration()`	This method gets the output configuration from the device.
`java.lang.String`	`getPath()`	Gets the path of the device.
`PenParameters`	`getPenParameters()`	This method attempts to get the current pen parameters from the device.
`PeripheralConfiguration`	`getPeripheralConfiguration()`	This method gets the peripheral configuration from the device.
`int`	`getPowerState()`	This method attempts to get the power state from the device.
`int`	`getProductId()`	Gets the product id associated with this device.
`int`	`getRegionIndex()`	This method gets the current region index.
`Region[]`	`getRegions()`	Deprecated. This method is deprecated in favor of getDeviceRegions() with firmware versions greater than 4.0.0.
`Resource`	`getResource()`	This method gets the Resource from the device based off the Resource index.
`ResourceAvailability`	`getResourceAvailability()`	This method gets the available space for resources on the device.
`int`	`getResourceIndex()`	This method gets the current Resource index.
`ResourceInfo`	`getResourceInfo()`	This method gets the Resource information at the current Resource index.
`Screen`	`getScreen()`	This method gets the screen based off the screen index.
`int`	`getScreenIndex()`	This method gets the current screen index.
`ScreenRegionInfo`	`getScreenRegionInfo()`	This method fetches the information about screens and regions on the device.
`java.lang.String`	`getSerialNumber()`	This method attempts to get the serial number from the device.
`int`	`getTextHeight(java.lang.String text)`	Gets the height of a string using the built-in font.
`int`	`getTextWidth(java.lang.String text)`	Gets the width of a string using the built-in font.
`TouchParameters`	`getTouchParameters()`	This method attempts to get the current touch parameters from the device.
`byte[]`	`getUuid()`	This method retrieves the universally unique identifier for this device from the device.
`java.lang.String`	`getUuidString()`	Gets the UUID from the device as a string.
`int`	`getVendorId()`	Gets the vendor id associated with this device.
`Version`	`getVersionInfo()`	Gets the version information about the firmware for this device.
`boolean`	`isButtonDown()`	Returns whether or not a button is currently being pressed.
`boolean`	`isOpen()`	Returns whether or not this device is currently open.
`void`	`modifyScreen(ScreenModify screenModify)`	This method is an alternative way to set variables on a screen.
`void`	`open()`	This method attempts to open the device with the operating system.
`void`	`read()`	This method attempts to read from the device.
`void`	`registerInputListener(InputListener l)`	This method registers an input listener for this device that will be notified of any new input.
`void`	`restoreDefaultRegions()`	This method attempts to restore the default regions in the device.
`void`	`saveRegions(boolean commit)`	Deprecated. This method is deprecated in favor of saveScreensRegions() with firmware versions greater than 4.0.0.
`void`	`saveScreensRegions(int commitStatus)`	This method will either discard or save screen and region edits Alternatively, it can be used to restore factory defaults.
`void`	`setActiveScreen(int screenIndex)`	This Method sets the index value of the current Screen.
`void`	`setAsicRegister(byte registerId, byte value)`	This method sets an ASIC register.
`void`	`setCalibrationData(CalibrationData calibrationData)`	Sets the data associated with calibration
`void`	`setDeviceConfiguration(Configuration c)`	This method sets the ScripTouch mouse configuration if supported.
`void`	`setDeviceRegion(Region region)`	This method sets a region on the device using the given values.
`void`	`setDisplaySettings(DisplaySettings s)`	This method sets the dynamic display settings if supported.
`void`	`setEasyscriptMode(boolean commitChanges)`	Sets the device to EasyScript mode.
`void`	`setErrorCorrectionTable(byte[] ect)`	This method sets the error correction table in the device.
`void`	`setFrequencyAmplitude(FrequencyAmplitude f)`	This method sets the frequency and amplitude of the ASIC.
`void`	`setGeneralParameters(GeneralParameters params)`	This method sets the general parameters of the device.
`void`	`setGENIIGuid(byte[] guid)`	This method sets the globally unique identifier for this device from the device.
`void`	`setGENIIPID(int pid)`	Sets the PID of the attached device.
`void`	`setOutputConfiguration(OutputConfiguration ouputConfiguration)`	This method sends the output configuration to the device.
`void`	`setPenParameters(PenParameters p)`	This method sets the pen parameters in the device.
`void`	`setPeripheralConfiguration(PeripheralConfiguration peripheralConfiguration)`	This method sends the peripheral configuration to the device.
`void`	`setPowerState(int powerState)`	This method sets the power state of the device.
`void`	`setPrimaryRegion(int regionId)`	This method sets the primary region of the device.
`void`	`setProscriptMode(boolean commitChanges)`	Sets the device to ProScript mode.
`void`	`setRegion(Region r)`	Deprecated. This method is deprecated in favor of setDeviceRegion() with firmware versions greater than 4.0.0.
`void`	`setRegionIndex(int index)`	This method sets the current region index.
`void`	`setResource(Resource resource)`	This method sets the Resource on the device.
`void`	`setResourceIndex(int index)`	This method sets the current Resource index.
`void`	`setRunMode(int runMode)`	This method sets the device's current run mode.
`void`	`setScreen(Screen screen)`	This method sends screen information to the device.
`void`	`setScreenIndex(int index)`	This method sets the screen index for the device.
`void`	`setSerialNumber(java.lang.String serialNumber)`	This method sets the device's serial number if supported.
`void`	`setStartupMode(int acqMode)`	This method sets the startup mode of the device.
`void`	`setTouchParameters(TouchParameters t)`	This method sets the touch parameters in the device.
`void`	`simulatePenInput(int coordType, int x, int y, boolean penDown)`	Simulates pen input, useful for unit testing with a real device.
`java.lang.String`	`toString()`	Prints this object as a human readable string.
`void`	`unregisterInputListener(InputListener l)`	This method unregisters an input listener from this device.
`void`	`updateFirmwareFromFw(java.io.InputStream stream)`	This method attempts to update firmware on the device from a Scriptel firmware stream.
`void`	`updateFirmwareFromFw(java.io.InputStream stream, FirmwareListener callback)`	This method attempts to update firmware on the device from a Scriptel firmware stream.
`void`	`updateFirmwareFromMot(java.io.InputStream stream)`	This method attempts to update firmware on the device from a Motorola SRECord stream.
`void`	`updateFirmwareFromMot(java.io.InputStream stream, FirmwareListener callback)`	This method attempts to update firmware on the device from a Motorola SRECord file.
`void`	`updateFirmwareFromPackage(FirmwarePackage pkg, java.io.InputStream stream, FirmwareListener callback)`	This method updates the firmware on the device using the abstract firmware package interface.
`void`	`updateRegion(Region r)`	Deprecated. This method is deprecated in favor of setDeviceRegion() with firmware versions greater than 4.0.0.
`void`	`writeDisplayChunk(DisplayChunk d)`	This method writes a raw raster to the display of the device.
`void`	`writeImage(int x, int y, java.awt.image.BufferedImage image)`	This function allows you to draw a buffered image on to the screen of the device (if supported).
`void`	`writeImage(int x, int y, java.awt.image.BufferedImage image, int targetDepth)`	This function allows you to draw a buffered image on to the screen of the device (if supported).

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - POWER_STATE_NORMAL
```
public static final int POWER_STATE_NORMAL
```
    Constant for the normal power state.
    
    See Also:
    
    Constant Field Values
  - POWER_STATE_POWERDOWN
```
public static final int POWER_STATE_POWERDOWN
```
    Constant for the power down power state.
    
    See Also:
    
    Constant Field Values
  - POWER_STATE_STANDBY
```
public static final int POWER_STATE_STANDBY
```
    Constant for the standby power state.
    
    See Also:
    
    Constant Field Values
  - RUNMODE_COMMAND
```
public static final int RUNMODE_COMMAND
```
    Constant for the command run mode.
    
    See Also:
    
    Constant Field Values
  - RUNMODE_TOUCH
```
public static final int RUNMODE_TOUCH
```
    Constant for the touch run mode (not supported by all devices).
    
    See Also:
    
    Constant Field Values
  - RUNMODE_PEN
```
public static final int RUNMODE_PEN
```
    Constant for the pen run mode.
    
    See Also:
    
    Constant Field Values
  - RUNMODE_AUTOTOUCH
```
public static final int RUNMODE_AUTOTOUCH
```
    Constant for the auto touch run mode (not supported by all devices).
    
    See Also:
    
    Constant Field Values
  - RUNMODE_TOUCHSINGLE
```
public static final int RUNMODE_TOUCHSINGLE
```
    Constant for the touch single run mode (reserved for later use).
    
    See Also:
    
    Constant Field Values
  - RUNMODE_TOUCHSTREAM
```
public static final int RUNMODE_TOUCHSTREAM
```
    Constant for the touch stream run mode (reserved for later use).
    
    See Also:
    
    Constant Field Values
  - RUNMODE_PENSINGLE
```
public static final int RUNMODE_PENSINGLE
```
    Constant for the pen single run mode (reserved for later use).
    
    See Also:
    
    Constant Field Values
  - RUNMODE_PENSTREAM
```
public static final int RUNMODE_PENSTREAM
```
    Constant for the pen stream run mode (reserved for later use).
    
    See Also:
    
    Constant Field Values
  - RUNMODE_PENCONTINUOUS
```
public static final int RUNMODE_PENCONTINUOUS
```
    Constant for the pen continuous run mode (reserved for later use).
    
    See Also:
    
    Constant Field Values
  - TEXTALIGN_LEFT
```
public static final int TEXTALIGN_LEFT
```
    Constant for aligning text anchors to the left of the text body.
    
    See Also:
    
    Constant Field Values
  - TEXTALIGN_RIGHT
```
public static final int TEXTALIGN_RIGHT
```
    Constant for aligning text anchors to the right of the text body.
    
    See Also:
    
    Constant Field Values
  - TEXTALIGN_CENTER
```
public static final int TEXTALIGN_CENTER
```
    Constant for aligning text anchors to the center of the text body.
    
    See Also:
    
    Constant Field Values
  - DEVICE_DISCARD_CHANGES
```
public static final int DEVICE_DISCARD_CHANGES
```
    Constant for discard changes made to regions and screens on the device.
    
    See Also:
    
    Constant Field Values
  - DEVICE_SAVE_CHANGES
```
public static final int DEVICE_SAVE_CHANGES
```
    Constant for save changes made to regions and screens on the device.
    
    See Also:
    
    Constant Field Values
  - DEVICE_FACTORY_RESET
```
public static final int DEVICE_FACTORY_RESET
```
    Constant for restore factory defaults to regions and screens on the device.
    
    See Also:
    
    Constant Field Values
  - SIMULATE_COORD_DISPLAY_SPACE
```
public static final int SIMULATE_COORD_DISPLAY_SPACE
```
    Constant for use with simulatePenInput() that tells the device that x and y are in display pixels.
    
    See Also:
    
    Constant Field Values
  - SIMULATE_COORD_DEVICE_SPACE
```
public static final int SIMULATE_COORD_DEVICE_SPACE
```
    Constant for use with simulatePenInput() that tells the device that x and y are in coordinate space (0-499 for EasyScript 1.0, 0-2999 for EasyScript 3.0, or 0-65535 for ProScript).
    
    See Also:
    
    Constant Field Values
- Method Detail
  - toString
```
public java.lang.String toString()
```
    Prints this object as a human readable string.
    
    Overrides:
    
    toString in class java.lang.Object
    
    Returns:
    
    Human readable string.
  - open
```
public void open()
          throws java.io.IOException
```
    This method attempts to open the device with the operating system.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem opening the device.
  - getUuid
```
public byte[] getUuid()
               throws java.io.IOException
```
    This method retrieves the universally unique identifier for this device from the device. This requires that the device be open.
    
    Returns:
    
    The UUID of the device.
    
    Throws:
    
    java.io.IOException - thrown in the event the device isn't open
  - getGENIIGuid
```
public byte[] getGENIIGuid()
                    throws java.io.IOException
```
    This method retrieves the globally unique identifier for this device from the device. This requires that the device be open. This is different than the UUID as it is not based on the glass error correction table, which can change the PCB is connected to a new/different piece of glass.
    
    Returns:
    
    The GUID of the device.
    
    Throws:
    
    java.io.IOException - thrown in the event the device isn't open
  - setGENIIGuid
```
public void setGENIIGuid(byte[] guid)
                  throws java.io.IOException
```
    This method sets the globally unique identifier for this device from the device. This requires that the device be open.
    
    Throws:
    
    java.io.IOException - thrown in the event the device isn't open
  - isOpen
```
public boolean isOpen()
```
    Returns whether or not this device is currently open.
    
    Returns:
    
    Whether or not the device is currently open.
  - isButtonDown
```
public boolean isButtonDown()
```
    Returns whether or not a button is currently being pressed.
    
    Returns:
    
    open state
  - getCapabilities
```
public Capabilities getCapabilities()
                             throws java.io.IOException
```
    Gets the capabilities of this device.
    
    Returns:
    
    Capabilities of the device.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem or if not supported.
  - getDisplayInfo
```
public Display getDisplayInfo()
                       throws java.io.IOException
```
    Gets the static display information from the device.
    
    Returns:
    
    Static display information.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem communicating with the device.
  - getDisplaySettings
```
public DisplaySettings getDisplaySettings()
                                   throws java.io.IOException
```
    Gets the dynamic display settings from the device. Not supported on devices without displays.
    
    Returns:
    
    Dynamic display information.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem communicating or if the call is not supported on this device.
  - getCoordinateRange
```
public CoordinateRange getCoordinateRange()
                                   throws java.io.IOException
```
    Gets the logical coordinate range for this device.
    
    Returns:
    
    Coordinate range for this device.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem communicating with the device.
  - getVersionInfo
```
public Version getVersionInfo()
                       throws java.io.IOException
```
    Gets the version information about the firmware for this device.
    
    Returns:
    
    Firmware version of this device.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem communicating.
  - getRegions
```
@Deprecated
public Region[] getRegions()
                    throws java.io.IOException
```
    Deprecated.
    This method is deprecated in favor of getDeviceRegions() with firmware versions greater than 4.0.0.
    
    Gets the currently configured regions stored in the device.
    
    Returns:
    
    Regions from the device.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem communicating.
  - read
```
public void read()
          throws java.io.IOException
```
    This method attempts to read from the device. The method will block until data is read or it is interrupted. Read data will be passed into the callbacks registered with registerInputListener().
    
    Throws:
    
    java.io.IOException - thrown in the event of a reading problem.
  - close
```
public void close()
           throws java.io.IOException
```
    This method attempts to close the device with the operating system.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getErrorCorrectionTable
```
public byte[] getErrorCorrectionTable()
                               throws java.io.IOException
```
    This method attempts to get the error correction table from the device.
    
    Returns:
    
    Byte array containing the raw error correction table.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getSerialNumber
```
public java.lang.String getSerialNumber()
                                 throws java.io.IOException
```
    This method attempts to get the serial number from the device. This may not be supported on all devices, it may also return empty on some devices.
    
    Returns:
    
    Serial number of the device.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem or if this call isn't supported.
  - getPowerState
```
public int getPowerState()
                  throws java.io.IOException
```
    This method attempts to get the power state from the device.
    
    Returns:
    
    Power state of the device.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getOperatingModes
```
public OperatingModes getOperatingModes()
                                 throws java.io.IOException
```
    This method attempts to get the supported operating modes from the device.
    
    Returns:
    
    Supported operating modes.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getGeneralParameters
```
public GeneralParameters getGeneralParameters()
                                       throws java.io.IOException
```
    This method attempts to get the general operating parameters from the device.
    
    Returns:
    
    General parameters.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getFrequencyAmplitude
```
public FrequencyAmplitude getFrequencyAmplitude()
                                         throws java.io.IOException
```
    This method attempts to get the frequency and amplitude settings from the device.
    
    Returns:
    
    Frequency and amplitude settings.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getAsicRegister
```
public byte[] getAsicRegister()
                       throws java.io.IOException
```
    This method attempts to get the current ASIC register values.
    
    Returns:
    
    ASIC register values.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getPenParameters
```
public PenParameters getPenParameters()
                               throws java.io.IOException
```
    This method attempts to get the current pen parameters from the device.
    
    Returns:
    
    Pen parameters
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getOutputConfiguration
```
public OutputConfiguration getOutputConfiguration()
                                           throws java.io.IOException
```
    This method gets the output configuration from the device.
    
    Returns:
    
    output parameters
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setOutputConfiguration
```
public void setOutputConfiguration(OutputConfiguration ouputConfiguration)
                            throws java.io.IOException
```
    This method sends the output configuration to the device.
    
    Parameters:
    
    ouputConfiguration - the settings for output configuration
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getPeripheralConfiguration
```
public PeripheralConfiguration getPeripheralConfiguration()
                                                   throws java.io.IOException
```
    This method gets the peripheral configuration from the device.
    
    Returns:
    
    peripheral configurations
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setPeripheralConfiguration
```
public void setPeripheralConfiguration(PeripheralConfiguration peripheralConfiguration)
                                throws java.io.IOException
```
    This method sends the peripheral configuration to the device.
    
    Parameters:
    
    peripheralConfiguration - the settings for peripheral configuration
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getResourceIndex
```
public int getResourceIndex()
                     throws java.io.IOException
```
    This method gets the current Resource index.
    
    Returns:
    
    integer of the Resource index
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setResourceIndex
```
public void setResourceIndex(int index)
                      throws java.io.IOException
```
    This method sets the current Resource index.
    
    Parameters:
    
    index - the value of the new Resource index
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getResourceInfo
```
public ResourceInfo getResourceInfo()
                             throws java.io.IOException
```
    This method gets the Resource information at the current Resource index.
    
    Returns:
    
    ResourceInfo of the resource information
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getResourceAvailability
```
public ResourceAvailability getResourceAvailability()
                                             throws java.io.IOException
```
    This method gets the available space for resources on the device.
    
    Returns:
    
    ResourceAvailability on the Device
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getResource
```
public Resource getResource()
                     throws java.io.IOException
```
    This method gets the Resource from the device based off the Resource index.
    
    Returns:
    
    Resource from the device
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - deleteResource
```
public void deleteResource(int index)
                    throws java.io.IOException
```
    This method deletes a Resource from the device
    
    Parameters:
    
    index - the number of the Resource to be deleted
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getRegionIndex
```
public int getRegionIndex()
                   throws java.io.IOException
```
    This method gets the current region index.
    
    Returns:
    
    integer of the region index
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setRegionIndex
```
public void setRegionIndex(int index)
                    throws java.io.IOException
```
    This method sets the current region index.
    
    Parameters:
    
    index - the value of the new region index
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getDeviceRegion
```
public Region getDeviceRegion()
                       throws java.io.IOException
```
    This method gets a region based off the index and report 152.
    
    Returns:
    
    a Region from the device at the current index
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getDeviceRegions
```
public Region[] getDeviceRegions()
                          throws java.io.IOException
```
    This method returns regions based on report 152.
    
    Returns:
    
    an Array full of all the regions on the device
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setDeviceRegion
```
public void setDeviceRegion(Region region)
                     throws java.io.IOException
```
    This method sets a region on the device using the given values.
    
    Parameters:
    
    region - the region and its values
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - deleteDeviceRegion
```
public void deleteDeviceRegion(int index)
                        throws java.io.IOException
```
    This method deletes the values of a region at the given index (153).
    
    Parameters:
    
    index - the region number to be deleted
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getScreenIndex
```
public int getScreenIndex()
                   throws java.io.IOException
```
    This method gets the current screen index.
    
    Returns:
    
    integer of the screen index
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setScreenIndex
```
public void setScreenIndex(int index)
                    throws java.io.IOException
```
    This method sets the screen index for the device.
    
    Parameters:
    
    index - the screen to retrieve later
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getScreen
```
public Screen getScreen()
                 throws java.io.IOException
```
    This method gets the screen based off the screen index.
    
    Returns:
    
    Screen the information about a screen on the device
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setScreen
```
public void setScreen(Screen screen)
               throws java.io.IOException
```
    This method sends screen information to the device.
    
    Parameters:
    
    screen - Screen information for a specific screen
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - deleteScreen
```
public void deleteScreen(int screenNumber)
                  throws java.io.IOException
```
    This method will delete the screen information at the given index.
    
    Parameters:
    
    screenNumber - the screen index to be deleted
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - modifyScreen
```
public void modifyScreen(ScreenModify screenModify)
                  throws java.io.IOException
```
    This method is an alternative way to set variables on a screen.
    
    Parameters:
    
    screenModify - the type of modification and its new values
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getScreenRegionInfo
```
public ScreenRegionInfo getScreenRegionInfo()
                                     throws java.io.IOException
```
    This method fetches the information about screens and regions on the device.
    
    Returns:
    
    Screen and Region information
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getActiveScreen
```
public int getActiveScreen()
                    throws java.io.IOException
```
    This Method gets the index value of the current Screen.
    
    Returns:
    
    integer value of the current screen
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setActiveScreen
```
public void setActiveScreen(int screenIndex)
                     throws java.io.IOException
```
    This Method sets the index value of the current Screen.
    
    Parameters:
    
    screenIndex - integer value of the new screen index
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getCalibrationData
```
public CalibrationData getCalibrationData()
                                   throws java.io.IOException
```
    This method gets the calibration data.
    
    Returns:
    
    calibration data
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setCalibrationData
```
public void setCalibrationData(CalibrationData calibrationData)
                        throws java.io.IOException
```
    Sets the data associated with calibration
    
    Parameters:
    
    calibrationData - the calibration data to be set
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getDeviceStatus
```
public DeviceStatus getDeviceStatus()
                             throws java.io.IOException
```
    This method gets the current status or mode of the device
    
    Returns:
    
    device status
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - clearLastError
```
public void clearLastError()
                    throws java.io.IOException
```
    This method clears the last error message from the device.
    
    Throws:
    
    java.io.IOException - IOException thrown in the event of a problem
  - getTouchParameters
```
public TouchParameters getTouchParameters()
                                   throws java.io.IOException
```
    This method attempts to get the current touch parameters from the device.
    
    Returns:
    
    Touch parameters.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getCalibrationState
```
public CalibrationState getCalibrationState()
                                     throws java.io.IOException
```
    This method attempts to get the current calibration state from the device.
    
    Returns:
    
    Current calibration state.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getContactCountMaximum
```
public int getContactCountMaximum()
                           throws java.io.IOException
```
    This method attempts to get the maximum number of contacts a ScripTouch multi-touch device supports. This is not supported on all ScripTouch devices.
    
    Returns:
    
    Maximum number of contacts.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem or if the call is not supported.
  - getConfiguration
```
public Configuration getConfiguration()
                               throws java.io.IOException
```
    This method attempts to get the configuration from a ScripTouch mouse device. This is not supported on all ScripTouch devices.
    
    Returns:
    
    ScripTouch mouse configuration.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem or if the call is not supported.
  - getDefaultRegions
```
@Deprecated
public Region[] getDefaultRegions()
                           throws java.io.IOException
```
    Deprecated.
    This method is deprecated in firmware versions greater than 4.0.0 since default regions no longer exist. Use saveScreensRegions() to restore factory defaults.
    
    This method attempts to get the default regions stored in a device that will be restored on a power cycle or reset.
    
    Returns:
    
    Default region set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - restoreDefaultRegions
```
public void restoreDefaultRegions()
                           throws java.io.IOException
```
    This method attempts to restore the default regions in the device.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem.
  - setRunMode
```
public void setRunMode(int runMode)
                throws java.io.IOException
```
    This method sets the device's current run mode.
    
    Parameters:
    
    runMode - Run mode to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setSerialNumber
```
public void setSerialNumber(java.lang.String serialNumber)
                     throws java.io.IOException
```
    This method sets the device's serial number if supported.
    
    Parameters:
    
    serialNumber - Serial number to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem or if the call is unsupported.
  - clearScreen
```
public void clearScreen()
                 throws java.io.IOException
```
    This method clears the device's screen.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - deleteRegion
```
@Deprecated
public void deleteRegion(int region)
                  throws java.io.IOException
```
    Deprecated.
    This method is deprecated in firmware versions greater than 4.0.0 use deleteDeviceRegion() instead.
    
    This method deletes a region.
    
    Parameters:
    
    region - Region number to delete.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setDisplaySettings
```
public void setDisplaySettings(DisplaySettings s)
                        throws java.io.IOException
```
    This method sets the dynamic display settings if supported.
    
    Parameters:
    
    s - Settings to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem or if the call is not supported.
  - setDeviceConfiguration
```
public void setDeviceConfiguration(Configuration c)
                            throws java.io.IOException
```
    This method sets the ScripTouch mouse configuration if supported.
    
    Parameters:
    
    c - Configuration to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem or if unsupported.
  - setFrequencyAmplitude
```
public void setFrequencyAmplitude(FrequencyAmplitude f)
                           throws java.io.IOException
```
    This method sets the frequency and amplitude of the ASIC.
    
    Parameters:
    
    f - Frequency and amplitude to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setPowerState
```
public void setPowerState(int powerState)
                   throws java.io.IOException
```
    This method sets the power state of the device.
    
    Parameters:
    
    powerState - Power state to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setErrorCorrectionTable
```
public void setErrorCorrectionTable(byte[] ect)
                             throws java.io.IOException
```
    This method sets the error correction table in the device.
    
    Parameters:
    
    ect - Error correction table to write.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setStartupMode
```
public void setStartupMode(int acqMode)
                    throws java.io.IOException
```
    This method sets the startup mode of the device.
    
    Parameters:
    
    acqMode - Acquisition mode to start up with.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setGeneralParameters
```
public void setGeneralParameters(GeneralParameters params)
                          throws java.io.IOException
```
    This method sets the general parameters of the device.
    
    Parameters:
    
    params - General parameters to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - asicReset
```
public void asicReset(boolean hardwareReset)
               throws java.io.IOException
```
    This method performs either a hard or soft reset of the ASIC.
    
    Parameters:
    
    hardwareReset - Whether or not to do a hardware reset.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setAsicRegister
```
public void setAsicRegister(byte registerId,
                            byte value)
                     throws java.io.IOException
```
    This method sets an ASIC register.
    
    Parameters:
    
    registerId - Register to set.
    
    value - Value to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setPenParameters
```
public void setPenParameters(PenParameters p)
                      throws java.io.IOException
```
    This method sets the pen parameters in the device.
    
    Parameters:
    
    p - Pen parameters to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setTouchParameters
```
public void setTouchParameters(TouchParameters t)
                        throws java.io.IOException
```
    This method sets the touch parameters in the device.
    
    Parameters:
    
    t - Touch parameters to set.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - setPrimaryRegion
```
public void setPrimaryRegion(int regionId)
                      throws java.io.IOException
```
    This method sets the primary region of the device.
    
    Parameters:
    
    regionId - Primary region to use.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - writeDisplayChunk
```
public void writeDisplayChunk(DisplayChunk d)
                       throws java.io.IOException
```
    This method writes a raw raster to the display of the device.
    
    Parameters:
    
    d - Raw raster to update the display with.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setRegion
```
@Deprecated
public void setRegion(Region r)
               throws java.io.IOException
```
    Deprecated.
    This method is deprecated in favor of setDeviceRegion() with firmware versions greater than 4.0.0.
    
    This method writes a region back to the device.
    
    Parameters:
    
    r - Region to update.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - updateRegion
```
@Deprecated
public void updateRegion(Region r)
                  throws java.io.IOException
```
    Deprecated.
    This method is deprecated in favor of setDeviceRegion() with firmware versions greater than 4.0.0.
    
    This method updates specific region information.
    
    Parameters:
    
    r - Region to update.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - saveRegions
```
@Deprecated
public void saveRegions(boolean commit)
                 throws java.io.IOException
```
    Deprecated.
    This method is deprecated in favor of saveScreensRegions() with firmware versions greater than 4.0.0.
    
    This method will either discard region edits or save region edits persistently.
    
    Parameters:
    
    commit - Whether or not to save the changes.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem.
  - saveScreensRegions
```
public void saveScreensRegions(int commitStatus)
                        throws java.io.IOException
```
    This method will either discard or save screen and region edits Alternatively, it can be used to restore factory defaults.
    
    Parameters:
    
    commitStatus - Either DEVICE_DISCARD_CHANGES, DEVICE_SAVE_CHANGES, or DEVICE_FACTORY_RESET.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem.
  - calibrate
```
public void calibrate()
               throws java.io.IOException
```
    This method puts the device into calibration mode.
    
    Throws:
    
    java.io.IOException - in event of a problem
  - cancelCalibration
```
public void cancelCalibration()
                       throws java.io.IOException
```
    This method cancels calibration.
    
    Throws:
    
    java.io.IOException - in event of a problem
  - drawText
```
public void drawText(java.lang.String text,
                     int x,
                     int y,
                     int align,
                     boolean invert)
```
    This method draws text on the screen (if equipped).
    
    Parameters:
    
    text - Text to draw.
    
    x - Horizontal location of the text anchor on the screen.
    
    y - Vertical location of the text anchor on the screen.
    
    align - Position of the text anchor relative to the text.
    
    invert - Whether or not to invert the colors of the text.
  - getTextWidth
```
public int getTextWidth(java.lang.String text)
```
    Gets the width of a string using the built-in font.
    
    Parameters:
    
    text - String to measure.
    
    Returns:
    
    Width of the string in pixels.
  - getTextHeight
```
public int getTextHeight(java.lang.String text)
```
    Gets the height of a string using the built-in font.
    
    Parameters:
    
    text - String to measure.
    
    Returns:
    
    Height of the string in pixels.
  - getGENIIConfiguration
```
public int getGENIIConfiguration()
                          throws java.io.IOException
```
    Gets the hardware configuration from a GENII device
    
    Returns:
    
    the hardware configuration the STGENII device detects
    
    Throws:
    
    java.io.IOException
  - setGENIIPID
```
public void setGENIIPID(int pid)
                 throws java.io.IOException
```
    Sets the PID of the attached device.
    
    Parameters:
    
    pid - the desired product id of the device
    
    Throws:
    
    java.io.IOException
  - GENIITune
```
public void GENIITune()
```
    Initiate the pen tuning process for GENII devices.
  - GENIIAbortTune
```
public void GENIIAbortTune()
```
    Abort the pen tuning process for GENII devices.
  - getGENIITuningStatus
```
public TuningStatus getGENIITuningStatus()
                                  throws java.io.IOException
```
    This method attempts to get the frequency and amplitude settings from the device.
    
    Returns:
    
    Frequency and amplitude settings.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem
  - getDriverName
```
public java.lang.String getDriverName()
                               throws java.io.IOException
```
    Gets the name of the driver attached to this device.
    
    Returns:
    
    Driver attached to this device.
    
    Throws:
    
    java.io.IOException - in event of a problem
  - setProscriptMode
```
public void setProscriptMode(boolean commitChanges)
                      throws java.io.IOException
```
    Sets the device to ProScript mode.
    
    Parameters:
    
    commitChanges - states whether the changes will last after a power cycle.
    
    Throws:
    
    java.io.IOException - in the event of a problem
  - setEasyscriptMode
```
public void setEasyscriptMode(boolean commitChanges)
                       throws java.io.IOException
```
    Sets the device to EasyScript mode.
    
    Parameters:
    
    commitChanges - states whether the changes will last after a power cycle.
    
    Throws:
    
    java.io.IOException - in the event of a problem
  - registerInputListener
```
public void registerInputListener(InputListener l)
```
    This method registers an input listener for this device that will be notified of any new input.
    
    Parameters:
    
    l - Listener to register.
  - unregisterInputListener
```
public void unregisterInputListener(InputListener l)
```
    This method unregisters an input listener from this device.
    
    Parameters:
    
    l - Listener to unregister.
  - getUuidString
```
public java.lang.String getUuidString()
                               throws java.io.IOException
```
    Gets the UUID from the device as a string.
    
    Returns:
    
    String representation of the UUID.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - getPath
```
public java.lang.String getPath()
```
    Gets the path of the device. Different per operating system. May change if the device is unplugged and plugged back in.
    
    Returns:
    
    The device path.
  - getProductId
```
public int getProductId()
```
    Gets the product id associated with this device.
    
    Returns:
    
    Product ID associated with this device.
  - getVendorId
```
public int getVendorId()
```
    Gets the vendor id associated with this device.
    
    Returns:
    
    The Vendor ID associated with this device.
  - getModel
```
public java.lang.String getModel()
```
    Gets the model of the device.
    
    Returns:
    
    Model of the device.
  - getManufacturer
```
public java.lang.String getManufacturer()
```
    Gets the manufacturer of the device.
    
    Returns:
    
    The manufacturer of the device.
  - writeImage
```
public void writeImage(int x,
                       int y,
                       java.awt.image.BufferedImage image)
                throws java.io.IOException
```
    This function allows you to draw a buffered image on to the screen of the device (if supported). The image must fit within the device's display boundaries. Images will be automatically converted to the displays color depth.
    
    Parameters:
    
    x - The horizontal component of the location the image should be drawn.
    
    y - The vertical component of the location the image should be drawn.
    
    image - The buffered image to draw.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - writeImage
```
public void writeImage(int x,
                       int y,
                       java.awt.image.BufferedImage image,
                       int targetDepth)
                throws java.io.IOException
```
    This function allows you to draw a buffered image on to the screen of the device (if supported). The image must fit within the device's display boundaries. Images will be automatically converted to the displays color depth.
    
    Parameters:
    
    x - The horizontal component of the location the image should be drawn.
    
    y - The vertical component of the location the image should be drawn.
    
    image - The buffered image to draw.
    
    targetDepth - Target bit depth of the image.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - setResource
```
public void setResource(Resource resource)
                 throws java.io.IOException
```
    This method sets the Resource on the device.
    
    Parameters:
    
    resource - Resource being sent to the device
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - updateFirmwareFromMot
```
public void updateFirmwareFromMot(java.io.InputStream stream)
                           throws java.io.IOException
```
    This method attempts to update firmware on the device from a Motorola SRECord stream. Legacy firmware is provided as MOT's. This should absolutely be avoided for new development as the MOT format has no protections in place to avoid writing the wrong firmware to a device which would render your device inoperable. Use this with extreme caution.
    
    Parameters:
    
    stream - Stream to read firmware from.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - updateFirmwareFromMot
```
public void updateFirmwareFromMot(java.io.InputStream stream,
                                  FirmwareListener callback)
                           throws java.io.IOException
```
    This method attempts to update firmware on the device from a Motorola SRECord file. Legacy firmware is provided as MOT's. This should absolutely be avoided for new development as the MOT format has no protections in place to avoid writing the wrong firmware to a device which would render your device inoperable. Use this with extreme caution.
    
    Parameters:
    
    stream - Stream to read firmware from.
    
    callback - Callback to call after a piece of the firmware has been downloaded.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - updateFirmwareFromFw
```
public void updateFirmwareFromFw(java.io.InputStream stream)
                          throws java.io.IOException
```
    This method attempts to update firmware on the device from a Scriptel firmware stream. All new firmware is provided in this format which provides a certain amount of protection against using the wrong firmware.
    
    Parameters:
    
    stream - Stream to read firmware from.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - updateFirmwareFromFw
```
public void updateFirmwareFromFw(java.io.InputStream stream,
                                 FirmwareListener callback)
                          throws java.io.IOException
```
    This method attempts to update firmware on the device from a Scriptel firmware stream. All new firmware is provided in this format which provides a certain amount of protection against using the wrong firmware.
    
    Parameters:
    
    stream - Stream to read firmware from.
    
    callback - Callback to call after a piece of the firmware has been downloaded.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.
  - simulatePenInput
```
public void simulatePenInput(int coordType,
                             int x,
                             int y,
                             boolean penDown)
                      throws java.io.IOException
```
    Simulates pen input, useful for unit testing with a real device.
    
    Parameters:
    
    coordType - Either SIMULATE_COORD_DISPLAY_SPACE or SIMULATE_COORD_DEVICE_SPACE.
    
    x - The horizontal component of the synthetic pen event.
    
    y - The vertical component of the synthetic pen event.
    
    penDown - Whether or not the pen tip is depressed.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem.
  - getDisplayContents
```
public java.awt.image.BufferedImage getDisplayContents()
                                                throws java.io.IOException
```
    This method will read the screen of a display info a buffered image. This only works with devices with newer firmware.
    
    Returns:
    
    BufferedImage containing what's on the screen of the signature pad.
    
    Throws:
    
    java.io.IOException - Thrown in the event of a problem.
  - updateFirmwareFromPackage
```
public void updateFirmwareFromPackage(FirmwarePackage pkg,
                                      java.io.InputStream stream,
                                      FirmwareListener callback)
                               throws java.io.IOException
```
    This method updates the firmware on the device using the abstract firmware package interface. Do not use this directly. Use updateFirmwareFromFw() or updateFirmwareFromMot() instead.
    
    Parameters:
    
    pkg - Package to use to load the firmware from the stream.
    
    stream - Stream to read from.
    
    callback - Callback to call after a piece of the firmware has been downloaded.
    
    Throws:
    
    java.io.IOException - thrown in the event of a problem.

Class Device

Field Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

POWER_STATE_NORMAL

POWER_STATE_POWERDOWN

POWER_STATE_STANDBY

RUNMODE_COMMAND

RUNMODE_TOUCH

RUNMODE_PEN

RUNMODE_AUTOTOUCH

RUNMODE_TOUCHSINGLE

RUNMODE_TOUCHSTREAM

RUNMODE_PENSINGLE

RUNMODE_PENSTREAM

RUNMODE_PENCONTINUOUS

TEXTALIGN_LEFT

TEXTALIGN_RIGHT

TEXTALIGN_CENTER

DEVICE_DISCARD_CHANGES

DEVICE_SAVE_CHANGES

DEVICE_FACTORY_RESET

SIMULATE_COORD_DISPLAY_SPACE

SIMULATE_COORD_DEVICE_SPACE

Method Detail

toString

open

getUuid

getGENIIGuid

setGENIIGuid

isOpen

isButtonDown

getCapabilities

getDisplayInfo

getDisplaySettings

getCoordinateRange

getVersionInfo

getRegions

read

close

getErrorCorrectionTable

getSerialNumber

getPowerState

getOperatingModes

getGeneralParameters

getFrequencyAmplitude

getAsicRegister

getPenParameters

getOutputConfiguration

setOutputConfiguration

getPeripheralConfiguration

setPeripheralConfiguration

getResourceIndex

setResourceIndex

getResourceInfo

getResourceAvailability

getResource

deleteResource

getRegionIndex

setRegionIndex

getDeviceRegion

getDeviceRegions

setDeviceRegion

deleteDeviceRegion

getScreenIndex

setScreenIndex

getScreen

setScreen

deleteScreen

modifyScreen

getScreenRegionInfo

getActiveScreen

setActiveScreen

getCalibrationData

setCalibrationData

getDeviceStatus

clearLastError

getTouchParameters

getCalibrationState